Got to get a move on with this or it will never get finished… Must tackle one of those jobs I keep putting off…
It’s brake gear time again. Since the bits are hidden behind the side frames of the tender they aren’t full of detail. Each hanger and shoe is a single etching – not a lot of depth but enough (for me) with the limited view you get. Besides, this loco is going to run on a garden railway where it will have to deal with slugs and snails on the rails. A friend describes how he had to remove the remains from the inside of a loco once – not pretty.
Once the brakes are on I quickly cleaned the metal, primed it and squeezed the can of matt black spray to get sufficient coverage.
The only change I made to the chassis before painting was to beef up the tops of the outer bearings. While a single thickness of metal should be OK, I have visions of carving a groove in the axle after a few miles of running. A bit of spare etch soldered in at the top should be enough.
Now all I have to do is fit it to the body. Some packing will be needed as the tender is a bit of a “low rider” at present. Nothing that a slice of plasticard won’t cure though.
No comments:
Post a Comment