Thursday, July 31, 2008

Solid nose


Rough nose
Originally uploaded by Phil_Parker.
There's not much to say about filling in the bow of the launch. All I had to do was glue some wood in place and carve it to shape - model boaters have done this for years.

Getting the right wood needed a bit of experimentation - the first choice, basswood, was too hard to carve in block form. Balsa worked very well.

To shape it I first shopped the block with a saw to get a rough shape. The wood was then stuck in place. Once dry, the first shaping came from a surform which quickly removed big chunks of wood. Then a coarse sandpaper and finally a polish with the fine stuff. With lots of guides from the 3 fixed sides this was a whole lot easier than I'd expected it to be.

No comments:

Post a Comment