London Festival of Railway Modelling 2019

Not my best video I'm afraid. 

There were a couple of problems, every time I pointed the camera at a layout, it stopped working. Now, this was rare, but I simply didn't have time to wait around and get all those exciting moving train shots, except at the Gauge One layout. 

However, there is a little behind the scenes stuff for entertainment, so hopefully that makes up for it. 

I'll try harder next time.

Saturday Film Club: Building a 16mm train set

An old film, but relevant to posts late next week, so pay attention.

Primer catastrophe

Needing some red oxide primer for the bottom of his boat, my dad drops into the local Halfords. They are out of stock.

He asks the staff, who check with the office. Red oxide primer is only available in brushable form.

This seems odd I think, so I Tweet @Halfords_uk for confirmation.

Hi @Practical_Phil! Thank you for taking the time to contact ourselves today! I'm afraid we do not sell the red oxide car primer in spray cans anymore. I hope this helps!

Noooooooo!

It looks like I'm going to have to find another supply of sprayable red oxide now.  (grumpy face) Pity as this is really good stuff and perfect for anti-fouling on the bottom of model boats. 

Go DCC, baseboard building and doughnuts in BRM

After a couple of months tangling with 3D printing, for the April 2019 edition of BRM, the team decided that I ought to go and learn about DCC.

For this, I was dispatched to Digitrains where I spent an excellent day having all the basics explained to me. There are loads of different controllers to try and plenty of advice to absorb. I'm still not ready to eschew analogue,  but I now feel I know a lot more about the subject and a lot of it isn't nearly as difficult as people like to make out.

For my Billy Bookcase projects, I've been building baseboards. The OO layout will sit on a Tim Horn laser-cut kit board. For my 009 model, I fancied something based around foam, which turned out to be a little more involved than I expected. At least the N gauge one is simple...

My camera has been out again, this time for the delightful 009 layout "First" - so called because it's owner hadn't built a layout before!

On the DVD, I'm adding weight to wagons. Which involves a joke with doughnuts. You have to see it to understand. 

Warehouse Wednesday: Tinsley Park Clock

Tinsley Park coke and coal. Lovely clock, photographed by me last century. I wonder if it's still there? Or even where it is?

This would make a nice model though, probably well suited to a downloadable format and printed then stuck to thick cardboard then glued to the front of a warehouse.

Photo tent review

I've mentioned in the past that I have to take photos in odd places, and don't really want to be dragging a great big booth with me. Well, a few weeks ago, I spotted an interesting advert for something that looked like it would be perfect a few weeks ago on Facebook.

It wasn't cheap, but I could just about persuade myself the £60 was worth it.

Then I did a bit of searching and found the same photo studio tent on Amazon for under 20. Sold!

It seems there are a few versions of this device. Size matters most, the cheaper ones are 20cm wide, OK for some stuff, but as you see, not for the larger model.

Then there are different fixings to hold the thing together. Magnets sound good, but according to the reviews, are rubbish. Mine has old-fashioned massive press-studs and works a treat. OK.

The LED lights run for a long while on my pound shop mobile phone battery. I'm guessing hours, although I tend to turn them off when not in use.

The foam backgrounds supplied are good, but mark when you plonk oily wheels on them so I need to sort out replacements to save post-processing work.

Overall though, I'm very happy. It folds up small, weighs very little and is properly portable.

Recommended. 

Photo from the above shot before clean-up

Painting with sponge

I seem to be using sponge for painting things as often as use a paintbrush recently. Some might say it always looks like I've painted with a tar brush, but we'll let that go...

First job - 16mm scale van roof. In this size I want some texture. This can be achieved with a layer of tissue paper, but since the plastic roof was pretty good, I decided to apply Humbrol 66 and 67 by dabbing them on with a bit of sponge.

This worked a bit, but the paint settled quicker than I hoped, so it was out with the talcum powder. Dabbing this in to the tacky paint worked a treat. Some texture but not too much. OK, this isn't a finescale wagon, but it still looks good.

Next, I needed some ground painting on a little diorama. Splodging on a mix of emulsion paints and working while they were still wet gave me some nice graduated effects. Darker colours towards the edges and light where there might be traffic.

I don't think I could have done this with a conventional brush, and I'm not loading up and airbrush with anything from Wilco - but sponge is cheap (mine came from packing) and works really well.

Midlands Garden Rail Show 2019

Last weekend, it was large scale model at the Warwickshire Events Centre. I pointed the video camera at them and bring you the results.

Saturday Film Club: Making model trains

Here's a mystery from the Pathe archive - a 90 second film showing O gauge model railway stock being built, but who for? 

I'm assuming Bassett-Lowke, but plastic coach body sides? 

Some impressive lining with a bow pen there and fretting out those windows must have been a nightmare!

(Sorry for the delay in approving comments this weekend, I'm away from the computer so will check in by phone every so often)

Off to Ally Pally

Lordy lordy Mary Poppins, It's a right two and eight and no mistake.

Yes, it's time to head to the capital for the London Festival of Railway Modelling. I'll be floating around the hall for a couple of days.

We're planning to bag quite a bit of social media stuff, so watch the BRM Facebook and Instagram feeds and RMweb. 

If you spot me wandering around, do stop me and say hello!

London Festival of Railway Modelling website

Big transfers for a big wagon

For a few months, I've had one of the IP Engineering vans given away as gifts to new subscribers sitting around. You might have seen it in my Butterley video.

My plan had always been to brand it for Garden Rail, but making the giant transfers and applying them without making a mess was daunting - and so I made excuses not to do it.

Last week, I bit the bullet and painted the sides with a few coats of cheap, white acrylic. Then a light spray with some Humbrol acrylic varnish.

The branding was printed on to some Experts-Choice clear decal film.  I didn't have a full sheet, but my printer didn't seem worried. There was just enough. More importantly, the ink from the Epsom Envy 5032 didn't run, something it does on glossy photo paper.

More varnish on the decals and everything was left to dry overnight.

The next day, I cut them out and gave them a bath in water with a drop of washing up liquid in it.

A wash of Micro-Sol on the surface and the transfer, which seemed thicker than expected, was slid into place. More Sol and some gentle patting. Then walk away and leave it to dry.

Results are pretty good. Yes, you can see the edges but the transfers are quite thick. There's no silvering so I'm happier than normal. I hate applying transfers!

Job done, now I just need to finish the painting.

Warehouse Wednesday: Colourfull Northlights

How about this for a modelling challenge?

Spotted on a visit to the Custard Factory in Birmingham, these Northlight ex-factory buildings have been decorated with serious arty graffiti.

Scratchbuilding the building sides wouldn't be difficult, although that chimney would be "interesting", but painting? I think I might have to pass. Maybe I could make transfers from photos? 

Whether you like this sort of art or not, you have to admit, it is colourfull...

Clamping curved things

Clamping curved bits of boats while the glue dries is always a bit of a nightmare. I have wasted many hours trying to persuade a pair of flat-faced and parallel jaws to hold things while they decide to slip off just when I think I've arranged them in a way that works.

My dad is building a ferry and hit the same problem. His solution was simple.

A big blob of Blu-tack on the jaws and then some worn out abrasive paper. This worked a treat, the paper providing enough grip and the Blu-tack helps sort out the angles. I'll remember this in future. 

Building a radio control switch

Club membership is very useful sometimes. All these new-fangled 2.4mHz radio sets we now use support 5 or more channels rather than the 2 from the "good old days". Most of the time I only use 2, but it seems a waste. One use for the extras would be switching lights on and off.

This needs a bit of electronic and luckily, Brian from our club has put together a course to show members how to build one.

I arrived expecting a couple of hours soldering but instead, we had the works - slides, handouts and even boards full of components for us to look at and learn how to identify.

By the end of the morning, we'd learnt a lot and then it was time to fire up the soldering irons to build our switches. Brian's design is simple to follow and well laid-out on a custom circuit board.

Being a proficient solderer, I had mine together in just over an hour, but even the beginners managed it in 2. There was a testing procedure and by the end of the day, 5 of the 6 attendees held working devices. The final one was taken away and a faulty resistor diagnosed.

I can't speak highly enough of the efforts put into this course. You'd happily pay good money to attend and not feel ripped off. As it was, we just paid for the components and enjoyed ourselves. I've not bought a couple more packs as I really fancy more light-up boats.

Did I learn anything?

Yes - how to identify resistors (I sort of knew this but now am more confident) and how to use desoldering braid, something that has always defeated me in the past.

So, if you are a "lone wolf" who doesn't like joining clubs, can I suggest it's time to reconsider. There is a benefit from being in the pack.

Judging photos for Bachmann

A couple of months ago, I spent a few hours at Bachmann's Leicestershire HQ.

My first job was to return the G scale Thomas train set I'd borrowed for the Peterborough show, but it wasn't the main reason for my visit.

I'd been invited to judge the annual Collectors Club photography competition.

Sat in a darkened room with club supremo Richard Proudman, we looked at the entries for each category projected on a big screen.

The process was a little like going for an eye test. The bit where they try two lenses and you have to decide between the results. The differences are subtle, and I always wonder if I've given the right answer.

Here, we had some really excellent photographs and needed to chose between them.

Each class was reduced to 3 images and then we looked more critically to decide a winner. Every time, any of these, and often some of the others already passed over, would have been a worthy winner.

Looking at the results in the Spring 2019 issue of the excellent club magazine, I'm happy with the choices - but kudos to every entrant. You certainly made me work for my lunch!

Saturday Film Club: A trip around Barmouth Junction

Sit back and take a trip around Geoff Taylors model, Barmouth Junction. The model includes a mix of scenic station scenes and hidden track - most of which is a complete mystery to the operators. I've never worked it out while I'm there!

Railmail wagon

One for the extinct model shops collection - a Graham Farish OO gauge wagon in Railmail livery.

Younger modellers will be surprised that Grafar produced in OO, the name now being attached to N gauge exclusively. They did, producing locos (including a Black 5 with an amazing mechanism in the tender), coaches and wagons.

According to the Interweb, Railmail was the biggest model railway mail-order box-shifters in the late 1970s and early 80s but went bust in 1986.

Can anyone confirm this?  Other than seeing adverts in old magazines, I don't remember the firm at all but would like to know more. 

Garden Rail - April 2019 - No. 296

Garden Rail hits the shelves today and as usual, we've an interesting mix of articles.

The main feature is the Kittatinny Mountain Railroad, built by Shawn Viggiano, a really good looking logging railroad. I worry that these can look a bit "samey" but this is great on the page thanks to Shawn supplying us with loads of photos so the designer could do a cracking job.

We've got a bit more variety in scale too with both G1 and G3 being represented. I've had to work a bit to do this and am pleased that all my legwork is starting to pay off. As the only newsstand large scale railway modelling magazine, we need to cover as many bases as possible and provide a wide variety of content.

One of my favourites is "Smurf" - the story of an ugly duckling where Mark Hill details a Tri-ang "Big-Big" steam loco. The result looks nice and there are some useful techniques demonstrated along the way.

Another set of interesting techniques come from Eric Londesburgh making buildings out of pottery clay. Weatherproof and surprisingly detailed, it's not something I'd read before but if you fancy having a go, this is more achievable than you might expect.

Full content listing on RMweb

Warehouse Wednesday: Door protection

Some interesting details spotted in Birmingham last weekend - protective lumps for the corner of warehouse doors. Presumably to stop drivers whacking them as they come in and out. Cast iron lumps being cheaper than shoring up a wall. Again. 

There doesn't appear to be a standard design so they could be made out of anything round that is sanded to shape and then the rear quarter removed with a small file. 

Minitrains Marvel

Take a bow, Minitrains Plymouth Diesel. 

Two days solid running - well over 14 hours - without a murmur. 

OK, I did give it a dose of light oil, but then it hadn't turned a wheel for several years. After some running, the lubrication reduced any noise to next to nothing. 

Pretty impressive I think. If you are in the market for a 009 diesel, I recommend it.