Making pavements

 

One of the jobs I've been least looking forward to on Selly Oak is laying the pavements. I'm not sure why, it's just a task I can't work up any enthusiasm for, but know needs to be done. 

Progress has been slow, but I have managed one side of the road. I'm using 2mm thick Daler Board cut to size and then scribed for the paving slabs. A home-made ruler marked out in slab sizes speeds this job up a lot. Even more if I didn't lose the ruler each time so I didn't need to make it up again.

This is sprayed with grey car primer and then painted with Precision weathered concrete paint. 

Years ago, I bought some very cheap packs of grey pastels which can be scrubbed on a very coarse file to produce powder. This is rubbed into the surface with a mucky finger. Dampening the digit helps the stuff stick into the scribed lines - although it seems to cling to the card pretty well. 

I'll use the same powder on the road eventually to add variety to the colour, but that will wait until the pavements are all down.

Ask Phil: A beginners Gauge 1 loco kit

 Lionel asks: Is the Mercian Models G1 Ruston kit suitable for a beginner? 

This is a difficult question to answer. Everything depends on what you mean by "beginner". 

If your construction skills are hardly up to a simple Lego model, then no, it's not. 

However, if you've done a bit of modelling, then "probably". 

Looking back at my notes on the two models I have built, they seemed to go together pretty well. No significant fettling was required, and thanks to using 7mm scale technology in the chassis, it's modelling rather than engineering. 

It helps if you have some skills forming metal. Sharp corners are easy thanks to half-etched lines inside to put the bend in the right place. Curves are a lot tougher - where do they start and finish? How bent are they?

 

 

The biggest challenge is the bonnet top. The gentle curved is easy enough, but the sharper shoulders need to be in the right place, or the piece ends up off-centre and you'll be taking it off and re-bending it to sort that out. Then the brass work-hardens and won't bend as easily, no matter how much you swear at it.

 

It seems I bent the metal over the supporting framework, presumably annealing it first to make that job easier. Extra bracing for the supports would be wise too, although I suspect I didn't bother. It doesn't help that you have to punch the rivets first, then try to push the metal around without flattening them. 

Aside from this, the shear mass of brass is the other problem. Metal sucks the heat out of solder so you need to get that in fast. I tack the bits together with a 45W iron and then seam the joint with a small gas torch and lashings of flux. Lionel tells me he's a happy solderer, so this shouldn't be an issue. 

The biggest problem of all is that the kit is out of stock, but it's worth contacting Trevor to see what he can do. 

 

Bear in mind that the £300 price of the kit is without motor, wheels and gears. That will drive the final bill up by at least £100. Pop a lovely quality ABC gearbox in and you'll double it.

 

Having said, that, the photos remind me that this is a good looking model. I'd quite like one myself!

 

For real beginners, I'd suggest cutting your teeth on some Severn Models kits. They go together well and are a lot cheaper than a loco. If you don't want to keep them, I'm sure eBay would offer a return on your investment. Just ignore the glue and use them as a way to practise both your metal-forming and soldering. If you can assemble something like the garden shed, you're a lot closer to a loco 

Missing Ally Pally Model Engineering Exhibition

My TV is full of snooker, which tells me that today, I should be driving in to London for the Model Engineering exhibition. It's always fun to see the tables of baize in the foyer of the exhibition centre. Quite an eye-opened for me the first time as I'd never seen a full-sized table in the flesh. 

I've never enjoyed driving in the capital, but by using the M1 rather than M40, and travelling on a Sunday, means it's not too bad. Getting back is slightly trickier as the satnav aims at the M40 but I like to keep the North Circular miles to a minimum. 

Anyway, the London ME is my favourite of the breed. There's less engineering and a wider selection of model-making disciplines on show. It tends to have a wider audience too with families enjoying the show. That's probably why there is Lego, Tamiya trucking and even steampunk. The "Imagineering" kids engineering section would have appealed to a younger me. 

For grown-up Phil, there are plenty of boats and some garden scale railways to enjoy. I like the engineering, but you can see the same models several years running with little progress in between. Mind you, I often find I've photographed the boats more than once too!

Hopefully, this time off will see some new exhibits appear if we are ever allowed out again. Since the engineers are largely at the top of the list for vaccinations based on age, maybe they stand more chance of a show than most?

If you'd like to re-live those heady days in the past, my blog posts and photos for each year can be found here:

• 2020
• 2019
• 2018
• 2017

Saturday Film Club: Britain's oldest trains retire

 

2020 saw the last trips for the Isle of Wight tube stock, nicely filmed here. Had we not been locked down, I'd have been tempted to make the trip for this. My one visit to the island saw me stand on the station, but not see any trains. I did travel by hovercraft though, a win in anyone's book.

Looking at the countryside scenes, I'm wondering if there is an interesting moving diorama to be built with an EFE Rail train, shuttle unit and chunk of countryside. Nothing too long, but an attractive moving picture.

Trent Lifeboat

 

A new addition to the Parker fleet, albeit one with a sad reason for it's arrival. It's no surprise that with model boaters tending to be on the older age of the hobby, that vessels come up for sale within the club due to illness or even death. 

The owner of this lifeboat passed away very shortly after his models were sold. I like to think that knowing they had good homes within the club will have been a tiny consolation. I know it would be for me. Admittedly, he wasn't a builder of models, but that doesn't mean you don't want to see them go to people who will appreciate them.

 

The model is a beautifully built 1:16 scale Trent from the Model Slipway range. At three feet long, it's at the top end of the boat sizes I want to deal with, but look at the detail that comes with a big (to me) model!

  

The hull is fibreglass and superstructure plastic with castings. Railings are metal and cleverly slot into each other to allow the top to be removed for access to the interior. 

 

 

Power is from a pair of brushed motors independently controlled via Electronise speed controllers. The handset allows for these to be run as a pair, or at different speeds. The jelly cell was a surprise, but a big boat needs ballast to get the hull to sit properly on the water and we should see plenty of operating time.

I'm not one for buying RTR models, but this was just too good an opportunity to pass up. If and when our water reopens from Covid restrictions, then I look forward to sailing her. 

Looking closely, there are a few personalisations in my mind - the switches can only be operated with the superstructure removed so I'll move them to somewhere more accessible. Taking the model apart at the waters edge isn't a good idea. 

We also need more crew. A Trent should be manned by six people, so this gives me the chance to add figures, a pleasant job. 

Whatever the reasons I now own this boat, it proves the value of a club. Members know how to find homes for valued models and will normally pitch in to help. I'm sure this is appreciated by anyone looking at a collection that meant a lot to a recently departed family member, wanting to do the best with them, but not knowing where to start. Otherwise, they can be given away for nothing.

Is that Henry Greenlys' bridge in Garden Rail?

 

February's Garden Rail includes a piece on a historic model railway bridge, designed by none other then Henry Greenly. You don't turn one of these up very often and it reveals a very different world of large scale modelling to the one we know today. Unless you are able to get your staff to do the hard work that is...

We also take a look at Lost'n'Bodge works in all its various guises, build a Leeds tram (another bit of interesting history) and a Fish'n'Chip shop where you could swear you can smell the vinegar.

Diamond Dotz - or 16mm scale rivets?

For Christmas, mum received a "Diamond Dotz" kit to produce a picture of a gecko. She sat for hours, happily picking up little hemispheres, and sticking them to the self-adhesive background. Following the instructions, she's produced a very attractive picture, and thoroughly enjoyed herself doing it. 

Included in the kit is a plastic funnel-tray that looks a lot like those used for pills. This allows you to pour some dotz (Yes, I know. It's Amercian. Nuff said.) back into their little packets once you've finished dotting. 

To apply the plastic pieces, there is a tool with a hollow end. This is poked into some wax supplied for the purpose. It grabs the dot, assuming it's the right way up, but lets go once the dot is on the sticky picture surface. 

This is all very neat, but there a lot of dotz left over, and I'm wondering how useful they would be as fake 16mm scale rivets? I've seen people use tiny "jewels" for this job. The dotz are 3mm in diameter and 1.3mm tall. They aren't hemispheres, but slightly faceted. Not enough to show under a coat of paint I suspect. 

I might get the chance to try this theory out as it looks like there will be more of these kits arriving in the future, and that means more leftover dotz!

Cake Box is back

If you were inspired by yesterdays Hornby 100mm challenge, you'll be pleased to know that the Cake Box Challenge is back to relieve you of lockdown boredom. 

There has been a lot of demand for this, partly in the form of fridge magnets, and with the return of lockdown, it seems the right time to give a competition I'm very proud of, another go. With a bit of luck, having a focus for some modelling with take people's minds off the news. I know I need a bit of that!

The rules are the same as in the past - the model must fit in a 8 inch square Cake Box and contain at least two railway items. We've added another on to fit the mood of the times too - two items of rubbish must be incorporated into the model. Exactly what you class as "rubbish" is up to you. 

There's more detail, including a video, over on RMweb.

Vote on the 100mm challenge

Back in October, I was instrumental in setting up The 100mm Challenge in the Hornby Collectors Club magazine. Well, it's now time to vote on the resulting models. 

Hornby have put the entries into a couple of videos so you can take your pick.

Over 16 years of age

  

16 and under

To vote, go to the comments for each video and list your first, second and third choices.You'll need to watch these in YouTube to do that. 

I'm blown away by how many entries there are. Pessimistic Phil always worries that no-one will be bothered by all this, but it seems I am (happily) wrong. There's some nice modelling too in both categories, by some new modellers too. Always good news for the future of the hobby.

Video: Unboxing the new Hornby pre-grouping coach

 

Something nice and newsy today -a first look at one of Hornby's new range of generic pre-grouping coaches.

When these were announced, it was a surprise. Even more of a shock was that they were in the warehouse - and I could get my hands on one. 

The video is part of BRM's coverage of the news, and there will be a fuller review in the March issue of the magazine, but I thought anyone who had missed it would appreciate a look. 

Me? I have some ideas for projects...

Saturday Film Club: Making the Paddington 2 circus train

 

Best film I watched over the festive period? 

Not Spartacus. That was over-long and rubbish. The winner, by a mile, was Paddington 2. 

The finale involves a train chase from Paddington station with Tornado and the Orient Express pursuing a circus train. As far as railway realism goes, it was rubbish, but if like me you can get over this, it's terrific entertainment. 

Anyway, looking online, Corbs has made a couple of the circus train wagons using some neat techniques and videoed it for our entertainment and education.

The Airfix Beach Buggy is back!

 

Excellent news from Airfix - the 1/32nd scale Beach Buggy is back, and should be in stock early in the year. 

Young Phil built one of these many years ago, complete with orange bodywork. It wasn't great, and like most plastic kits, gradually deteriorated until it was thrown away. I've always fancied building another, but the prices for unbuilt kits were truly terrifying. 

You might remember, I had a go at the Revell kit a couple of years ago. It was OK, but (and it might be rose tinted specs doing this) I remember the Airfix version being made of proper, hard plastic and just a much better model. It also enjoyed a bikini-clad figure as part of the kit, which can't be a bad thing. 

So, I'm a happy bunny and plan to get the glue and orange paint out as soon as my kit arrives.  

I wonder if they can find the moulds for the Bond Bug next?

Farewell to the Haynes manual

 

According to my Practical Classics magazine, the new owners of Haynes, Infopro Digital, are to stop publishing paper versions of the famous manuals. 

Apparently, they don't see a future in printing the guides. 

If I'm being generous, and not using the phrase "asset stripping"*, then I'd say they don't know their market. 

No classic car owner wants a digital copy of the guide, or at least they don't want it to be their only copy. Does anyone seriously expect the owner of an Austin Maxi to take an iPad under the car? Have they seen how mucky these things get? 

I usually have two copies - a clean one and a garage one. The clean one could be digital, but the dirty one? No chance. 

I've even got manuals for cars I don't own. Picked up cheaply, they are there for use "one day". I might never own a Type 25 van, but I could take it apart if I did buy one.

OK, Haynes manuals aren't perfect - the VW Type 2 fusebox photos are of a Beetle - but they have been part of my motoring life as long as I can remember. When a new (to us) car arrived, we went to Halfords and bought the book to go with it. Not having this option is very sad.

Now, I know that modern cars and their owners aren't quite so keen on tinkering, but the classic car market is massive, so if printing inventory is bad, why not offer a Print On Demand option? Very few people couldn't wait a few days for their copy to arrive. 

*According to the magazine "a fire sale" of the workshop has already taken place.

Adverts

 

There are quite a lot of advertising hoardings around the Selly Oak bridge, and although my model has moved things around, I want to include adverts to add a bit of colour to the scene. 

Wills have provided the first one for the hill. All I had to do was pluck a couple of adverts from the web, re-size them and spray with matt varnish to avoid them fading. Why this looks odd in the photo is a mystery, but they look fine in real life. 

I reckoned an APT would make sense, since this model is for Rapido who built the APT-E model, and since Brexit was apparently done and dusted on the day I printed them, something about visiting Johnny Foreigner for your holidays in an Austin Allegro looks nice on the other half of the board.

Lunchtime - a Parker perenial

 

A little scene on Selly Oak. Two workers in the wood yard enjoy a bite of snap sat on a stack. 

The greaseproof paper is a tiny square of Rizla paper, the sandwiches bit of microstrip and the flask a short length of microrod. 

It occured to me that this isn't my first attempt at a model lunch. 

My first was on Melbridge Dock, and the materials haven't changed in decades. This isn't the first man sat there though, the original was lost as a show and had to be hurriedly replaced. He's feeding the ducks in the bay, so there are bits of sandwich in the water. 

 

 

There's no time for lunch while building the Hellingly Hospital railway, but we still have someone sat on a cable reel drinking a cup of tea. 

People grabbing a bite make a great little cameo scene - there wouldn't be much movement, unless you fancy building animated jaws of course!

Does anyone actually BUILD the Wills bicycle shed?

 

The Wills SS23 Bicycle shed with Bicycles is a lovely kit, and one that has been around since the dawn of time (OK, 1980s), but I'm not sure how many I've actually seen built up on layouts. 

I wonder how many people, like me, see it as a source for rather nicely moulded bikes to decorate the layout? 

At a quid each, they don't seem cheap, but I can't think of a more economic way to add this vital detail to a layout. Well, unless you want to bend them up out of wire that is - and I don't. 

 

 

Selly Oak has gained a couple tucked away in the timber yard and I think they look great. A few dotted around are a quick and easy addition which give that all important clutter needed to make a layout come alive. 

 

 

 

If anyone can suggest alternative cycle suppliers though, I'm all ears! This is a 1970s layout, is there a 4mm scale Chopper out there?

Calendar time - but is there a point?

 

In the past, I've provided an early list of shows I'm adding to my calendar as a way of filling a post, and reminding myself how busy I am. 

We all know how badly wrong this went in 2020. Almost every event on the page was scribbled out, a victim of the pandemic. 

Now I have a 2021 calendar and am faced with thinking how we'll get on this year. 

From the pronouncements of various politicians, you might believe that anything after Easter is good to go. Sadly, all the politicians are liars and idiots, and I've read the future in the October editorial from the medical journal, The Lancet. 

COVID-19: we will not be returning to the old normal

This is worth a read, but you get the gist from the final couple of sentences, "It is time to forcefully impress on people that basic measures to limit the transmission of SARS-CoV-2 are here to stay. This is the new normal."

And that pretty much wraps it up. We will always wear masks. We will always social distance. Everything will always be shut down. At least in the opinion of the doctors who wrote this, and if you watch Twitter, you will have spotted they aren't alone.

"That's overly pessimistic", I hear you cry, "Once more people have the vaccine, we'll open things up. Normal life will return."

Will it? My suspicion is that if things do improve, and I very much hope they will, the clarion cry from the medical profession will be "Zero Covid". Some see themselves engaged in a war with the virus and only total victory is acceptable, no matter what the cost in businesses, jobs and people's mental health. Our press love a good war, witness the suggestion a few weeks ago that we'd be using gunboats to handle a fishing dispute, even though this meant firing on citizens of a county with nuclear weapons. I can see then wetting themselves about the idea we can "win" the battle with Covid, and our increasingly useless politicians will agree. Either that or be considered uncaring. 

Anyway, if this is correct, then we'll not see any physical shows in the future. Even if it's only slightly wrong, getting the show scene back up and running will take time. I wouldn't put loads of time and money into an event knowing it could be cancelled at a moments notice on a politician's whim. 

It's not the end of the world though. One thing has impressed me over the pandemic - the ability of businesses to adapt to the changing rules. Go to a supermarket and there are plastic barriers protecting staff and shoppers from each other. Click'n'collect has become normal. In our hobby, online traders have been doing breathtaking business. People have embraced creative hobbies with a passion.

We've seen Virtual Shows, and whatever happens, they will continue. For the housebound or those living a long way from a physical show, this is great news. It's certainly new and different, and still evolving. We are sort of at the second series of the Great British Bakeoff, a very different beast from the sixth series when they had refined the format. 

The practical upshot of all this is that I'll be adding events to my calendar on a monthly basis. I really, really hope things get better this year, but I won't pin my hopes on anything. As I've learnt in the past, looking forward to something is a sure path to disappointment. 

But let's hope this is a blog post that ages badly, and we can all laugh about next year. At least the pictures in my calendar are pretty.

Saturday Film Club: Draw a VW camper van

 

Time for me to remember that as well as a Beetle, I own a VW campervan - I just don't know where it is. The guy who did mechanical stuff for me was supposed to be selling it, but moved to Bloxwich (I think) taking it with him, and I've never chased it up.I still have all the registration documents, so I assume it's just sitting. 

Anyway, while my van is a bay window, let's learn how to draw a splittie, courtesy of Shoo Raynor.

2020 - Review of the year

2020 was rubbish, is there anything more to say?

OK, here's the annual project update:

• 7mm scale Garratts STILL haven't been out of their boxes. I'm looking for a new builder for the one I've been commissioned to produce.
  
• 3mm scale Class 25 hasn't bothered to build itself.
• O gauge "Flying Banana" railcar, still in the box, and now there is a RTR version on the way.
  
• 4mm GWR steam railcar, I know it's one people would like to see finished. Me too.
• The Cravens DMU did see some progress but I fell out of love with it again, so it's back in the box. 

The Beetle didn't change either. I keep looking at it. I even bought a couple of VW magazines in an effort to find someone who would accept money for working on it, but that's proving harder than you might expect. 

Despite thinking I'd have to ease off the blog posting a bit, I've put out a post-a-day all year, something I'm both proud of and y amazed at. Page views have dropped off a bit towards the end of the year - that's a reminder to me to be more engaging and interesting. This isn't helped by my being busy, but we'll come to that later. We did hit the 5000th post in January, that's got to mean something. 

What did I build? 

Parker's Lockup from a Petite Properties kit.

 

A Lindberg Tugboat 

 A festive tank. 

and of course, there is the on-going Selly Oak project. 

There have been a few other little builds this year, but the truth is that Covid has seen me busier then ever with magazine work. One of the biggest hits to my time has come from Virtual Exhibitions, both took astounding amounts of time to put together. 

For the first, I built a micro layout called "Ferness Quay" and made videos of all the stages. This took place over four weeks in addition to my normal work, so there went several weekends and evenings. I'm really proud of the model, and it's been very useful as a background for other projects and reviews. 

There's been a project or two an issue for BRM, some for the Hornby Collectors Club and of course, editing Garden Rail. 

Shop closures, especially during the first lockdown, have hit physical magazine sales for everyone, although I'm pleased to say we are doing OK. There's been a lot of work going in to put out more digital content as well as the Virtual Shows. Our weekly newsletter always has a contribution from me and increasingly, this is more than just posting an article from the past. 

In theory, the loss of the show calendar should have left me with lots of spare hours - but it's been quite the opposite. Where does the time go? 

All this is very exciting, but I'll be honest, the thrill of building something for myself has been dented. Truth is, I struggle for motivation. I look at potential new projects and feel a flicker of excitement, but the enthusiasm to actually get started on something isn't there. 

Not being able to go anywhere or do anything has hit me harder than it really should do. Of course there are many people far worse off than me, so I shouldn't complain, but this is my blog so a tiny self-indulgent moan is allowed in my opinion. I've definitely used work to take my mind off the rest of the news and in doing so, buried myself and sometimes not stayed in touch with people and let them down. I must do better in 2021.

With a bit of luck, things will look up. My workload is looking a lot better for the early part of next year. As I write, I'm ahead on both main magazines with the prospect of improving this further in the near future. Mind you, last year I wrote, "I have a number of projects I'd like to work on and maybe there will even be a bit more time as my workload sorts itself out a bit and perhaps I become a bit more focussed and efficient." and THAT didn't happen did it?

There are some time-eating projects on the horizon with some exciting opportunities I'm keen to try. This is all part of the evolution of my job. We'll see how it all pans out. 

Anyway, thanks for reading all this, thanks for dropping in to the blog and seeing what I'm up to. Let's hope 2021 proves to be an improvement on its predecessor!

Spin me round like a painty, Steampunk turntable in BRM

 

How do you make a turntable rotate? I show you in the latest issue of BRM using a couple of different, easy-to-build kits. 

Mind you, the Peco turntable presented some problems. How are you supposed to bring three segments of the pit together simultaneously so they can all interlock, with only two hands? Do the Boyz from Beer have an extra limb for this sort of thing? 

In the review section, I take a look at the Bassett-Lowke Steampunk range of locos, rolling stock, figures, greeble and paint. They give me this stuff because I'm not grown-up enough for serious trains and also, I asked for it - Steampunk is fun!

Finally, over on the DVD, a little piece about bodging while painting models. 

February 2021 British Railway Modelling on RMweb.

What I want for Christmas is a new fence

 

What do you do in that period between Christmas breakfast and your sister turning up so the day can start? 

Me - I looked at the fence erected alongside the Selly Oak canal and realise that I'd not allowed space for the pipe bridge that will camouflage the baseboard join through the water. And decide to do something about it. 

 

 

The ScaleModelScenery fence is well fixed into the baseboard. Yes, I know I should have put it in the right place before fixing, but I got it wrong. 

 

My scalpel wouldn't touch the laserboard, at least not without waggling around and bending things. In teal life you'd use a saw and that's what I did. The Xacto sliced through the material perfectly and reasonably cleanly. The corner could then be pulled apart and reassembled to allow more space on the towpath. 

 

 A little touch-up with some brown acrylic and the job is done. Fortunately, this is a scruffy fence, so my less than perfect workmanship won't be noticed. 

Not a long job, and something to stop me eating chocolate for a few minutes!

Ask Phil: LMS Dock Tank

 

David asks:

 Having made a few kits, DJH and Ks mostly, I wanted to make an LMS dock tank and I know from your blog that you will understand when I say I wish I hadn't bothered.

Your blog has been a great help but I don't think I'll be attempting another all brass loco kit.  

Two Questions:  

1.What did you use to achieve the gleaming finish before painting? 

 2. How did you manage to paint inside the cab? 

At the risk of teaching you to suck eggs - When I solder nuts I thread the nut on a cocktail stick to hold it in position. In the worst case a few twists of a tap is enough to clear any solder. 

When making the waggly bits I just thread a piece of paper between the bits I want to stay free. Thanks for all the tips in your blog, I think I'll achieve a working dock tank though nowhere near as good as yours.

The Mercian LMS Dock tank isn't a beginners kit by a long way. Part of the problem is the prototype puts a lot of wheels in a small area, precluding much in the way of chassis strengthening where you need it. I recall putting bracing wires in in the same way you weld rods into car doorways when straightening the body, just to keep the chassis in line. 

Add to that all the waggly bits (never fun) and a cab roof designed to clip in and out that I've never made work, and this is a kit that requires a level of skill. Were it to be designed now, I suspect that most of these points would be dealt with. That said, it's quicker than scratchbuilding!

You can read one of my builds of this kit here. 

Anyway, the questions: 

1) Shiny locos come from regular application of Shiny Sinks cleaner. After every soldering session, I head down to the kitchen sink to give the metal a scrub with this followed by a nice clean with washing up liquid and plenty of water. Do this ever time and you remove flux from the hidden corners. 

2) The inside of the cab is black on my model. I know it probably should be cream, but I solder the roof wrapper into one piece, or even replace it with a plastic one, and that makes getting the brush inside a nightmare. I have done this, but it's fiddly, knackers the brush and to be honest, if you stand a crew in the doorway, you can't see in anyway!

Good point about the paper when making valve gear. I have used Rizla papers for this, but now prefer tin foil. It's tougher and yet repels solder. 

And don't think I'm a genius with the dock tank. Mind has more slop in the mechanicals than is really ideal, but I think that's why it runs well. I think I had to re-make the pickups at least once before I got there - but now it's a good-looking loco. It's a surprise that there has never been one RTR, but I'm not complaining. 

Incidentally, the kit isn't available in 4mm scale any more, but I'd love to build the Gauge 1 version one day. 

Christmas digger build

 I consider Christmas a success if my present pile includes something I can put together after lunch, while watching a good film. The kit mustn't be too taxing, and shouldn't form part of a serious project. Lego is perfect, but knock-off Meccano works well too. 

 

 

I think this Science Club digger came from The Works, and am told it cost £10 for a pair of kits - my dad has a 4X4 from the same range. So, cheap enough for a bit of fund and there might be some useful bits inside. 

 

On the bits front, the motor/gearbox unit has possibilities. At 20mm wide, it would fit in a garden railway locomotive. The 2 X AA battery box includes a switch and these aren't that cheap either. 

The metal bits are strong enough. I don't know if the hole pitch is the same as Meccano, but I bet it's not far off. Yes, I could check with a ruler, but there is chocolate to eat. 

Everything bolts together easily enough. A cross-head screwdriver and spanner are included in the box

and are good enough quality they will head to the toolbox eventually. Nuts and bolts are in reasonable metal so I didn't manage to chew the heads off any by using excess force. Three lengths are used, and these are identified at each stage of the instructions. 

You need your brain in gear as the photos for the instructions are tiny and so it helps if you can figure out things for yourself. The stage took me much pondering - it looks like the motor mounts centrally under a plate, but if you to that, the gearbox doesn't fit between the orange spacers. Offset it by one hole and everything is fine. 

The result looks like the model on the box. Throw the switch and it scoots across the floor at a modest pace. In fact, at a pace that would be good for a garden railway locomotive...

And the film I watched? Sparticus. Never seen it before and won't bother again, but I've ticked off another classic film hole in my memory. It certainly didn't distract me from building, and lasted well over an hour longer than the kit.

Video: Build a Metcalfe Models signal box

 

 Let's face it, we're all full of turkey and chocolate right now and can't be bothered with much. With that in mind, sit back and watch me build a card kit signal box.  

This is something I recorded during the year and appeared on BRM TV - but now has a general release. Enjoy!

Saturday Film Club: Cheer yourself up with Thomas the Tank on cello

 

Let's be honest, we all need cheering up right now, and this is a video that's been making me smile all year. The Thomas the Tank Engine theme played by a talented musician on seven cellos and a bell.

Merry Christmas

 

Immortalised in fridge magnets

A nice early Christmas present arrives in the post from RMweb member Southern42 - a set of refrigerator magnets immortalising the BRM team in festive snow scenes. 

These were sent as a thank you for organising the Cake Box challenge and are set on her model using the plastic giveaway figures from a year or so ago.

It's a really nice gesture and makes me even prouder to have put together the challenge. We got a lot of people modelling and some superb dioramas were produced. Maybe it's time to have another round in lockdown. I'll have to think about it.

I'm not sure how Andy will take to being turned into Santa though!

Santas and reindeer

 

For a laser-cut sleigh, I need laser-cut reindeer and handily, HGLW produce a couple of sets. I ordered one with and one without Rudolph. 

Assembly simply requires layering the parts with some PVA and then fitting the antlers on the top of the heads. A bit of sanding sealer, some red paint and it's job done. 

Definitely, the oddest laser-cut kits I've ever built!

Finally, some Santa's.

Resin figures that just required painting. The taller one is 16mm scale, his diminutive friend is G. 

All of this for some final festive images: 

A rail-mounted sleigh

 I fancied something interesting and festive for Garden Rail this year. Looking through the HGLW website, I found a laser-cut sleigh kit. 

The model is intended to be a wagon load, but it seemed to me that mounting the sleigh on rails would be far more fun. Assembly is easy with PVA glue, everything slots together easily.

Using a Binnie tipper chassis, I found that the legs could just fit on the frames once the skis were cut away. Glued and then pinned in place, they just make it and seemed pretty solid now. 

The skis fit on the sides of the rails and it looks (IMHO) fantastic. Sprayed red and with white trim applied after painting, it really looks the part for the narrow-gauge Father Christmas. 

All we need, is something to pull it...

My first house

 

We aren't (currently) banned from having Christmas trees, so ours has gone up. Like many families, we have decorations that make come out of the box each year for nostalgic reasons rather than aesthetic ones. This is one of those. 

It's a model house I made when I was around 5. 

In the big tin shed/garage with a workbench, I made my mum a house from a bit of wood. I can't remember how I carved it, but it looks as though a blade was involved rather than abrasives. The chimney as attached with a nail - my hammering technique hasn't improved mush over the years!

The weird thing is, I don't think this is the finished model. I seem to recall this was a test and I built another which had windows scribed in the surface and a blackboard paint coloured roof. I've no idea what happened to that one, but at least this survives - probably the earliest model I even built!