Tuesday, November 17, 2026

Walsall Wheels

 

02 Diesel wheels
I am a proper large scale modeller. I have bought some wheels from Walsall Model Industries. 

For those not familiar with the stand at large-scale shows, it's full of cast-iron wheel blanks. Lots of sizes, but all pretty much straight from the mould. Fascinating, and terrifying in equal measure. This is proper engineering stuff. You need a lathe to make use of them. 

Last year, I bought a kit for an 02 diesel, one of my favourite prototypes. It wasn't expensive, but all I got in the packet were the etches. There is a suitable motor and gearbox in the stash, and after a little work, I tracked down the castings - which cost me as much as the kit, but never mind. 

Naively, I had assumed that a quick call to Slater's would furnish me with wheels. A look at the website told me I was wrong. 

At the large-scale shows, I've been looking at the options, but there simply weren't any. I knew of Walsall, but was a little nervous to approach them. I'm no engineer. I don't own a lathe, and even if I did, I'd have no idea how to turn a wheel. 

Fortunately, it turns (geddit!?) out that Walsall can finish the wheels for you. Price, £37 per axle if uninsulated is OK. Since we'll be dead rail on the proposed club layout, this is fine. The casting is only £6.42, but it will take quite a bit of time to finish it, so the price isn't, IMHO, unreasonable. Better still, the holes in the centre are square to make quartering easy. It all looks a bit Slater's to me, but the Brummies assure me they did this first. 

Most impressively, I ordered the wheels on Saturday, and by the following Wednesday, a packet containing them was in my hands. Amazing service. 

No comments: